[K3CAL] Looking for a Yaesu MH-27 Hand Mic

[James Tetlow]

Is the radio a FT 2500m?
A hand mic mh-26 g8j (without DTMS) will work, and the FT 2600m radio mic mh-36 b6j will work. Should be same pin out.
The mh27 series is known for 3 capacitors leaking, but I don't know the values. 
Will check old mic box but I think my earliest are 38 series DTMF.

Sent from my iPad,
Best Regards, 73,
Jim Tetlow

> On Jan 15, 2016, at 18:47, N3AE <n3ae at comcast.net> wrote:
> 
> I'm trying to repair one of the associations radios and need a MH-27 mic (hopefully in known good condition) to see if the rig's MH-27 mic is bad as I suspect it is.
> 
> The old MH-27 has a RJ-45 style connector but a different pin out than some other Yaseu hand mics that I have around the shack.   I'd rather not kluge up an adapter cable if I don't have to. Pin out diagram attached.
> 
> Shawn
> N3AE.
> <MH-27 Mic Pinout.JPG>
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20160115/0ab9239e/attachment.html>