[K3CAL] Workshop for Yaesu Handheld APRS.

[David]

Jim
if you do the Yaesu TM-400D I would be interested in that. I have never send
a picture with my microphone camera
Dave
-----Original Message-----
From: K3CAL [mailto:k3cal-bounces at mailman.qth.net] On Behalf Of Jim Tetlow
Sent: Wednesday, February 10, 2016 6:49 PM
To: k3cal; David Metler
Subject: [K3CAL] Workshop for Yaesu Handheld APRS.

Yaesu Workshop responded:

Thus far I have response from the following:
02.10.2016 18:30 local.
Dave kc3adg
Jim k3uga
Don kr3a (possible)
Eric wg3k
Les kh6cuj
Chip k3awd

This is not a workshop of Elmer's but it could be! If you would like to
learn more about APRS Position and Messaging; or care to share your
knowledge and experience please consider joining us. This shop may lead to
other functions of these (FT-1D & FT-2D) radios, including firmware
upgrades, programming, micro sd cards, groups, pictures, and wires x if the
group desires. If you are thinking of getting one of these radios (while
FT-1Ds last), get hands on experience before a major purchase!
They have been questions of doing the same with the 400s also(to follow
later) and maybe the 100s if anyone has one. Might even extend to
understanding the function and programming the fusion repeater......Sky is
the limit! All it requires is your valuable time.

I will leave RSVP open  and I will make arrangements to secure a room for us
at Mt. Hope Community center. I will keep all informed as to the progress.
Thank you. k3uga, Sent from my iPad, Best Regards, 73, Jim Tetlow
______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html