[K3CAL] [Norton AntiSpam] Fwd: installing antennas at Prince Frederick Maryland tower
David Weaver
W3PQS at comcast.net
Fri Sep 4 14:30:07 EDT 2015
Those of you that would like to send a check please make check out to.
Calvert Amateur Radio Association Inc.
PO Box 306
Huntingtown , Maryland 20639
In the memo column of the check please put Prince Frederick tower project.
If you would like to have a receipt for tax purposes we can supply you with one just requested it we are a 501 C-3 organization.
Dave
W3PQS
From: K3CAL [mailto:k3cal-bounces at mailman.qth.net] On Behalf Of David Weaver
Sent: Friday, September 4, 2015 10:53 AM
To: 'Calvert Amateur Radio Association - K3CAL'
Subject: Re: [K3CAL] [Norton AntiSpam] Fwd: installing antennas at Prince Frederick Maryland tower
The company is asking for $3040.00
we have $1000.00
we need $2040.00
plus a standoff I think I have one that's over 3 foot in size sent him a picture of it.
Dave
From: K3CAL [mailto:k3cal-bounces at mailman.qth.net] On Behalf Of Rich Weaver
Sent: Friday, September 4, 2015 9:08 AM
To: Calvert Amateur Radio Association - K3CAL
Subject: Re: [K3CAL] [Norton AntiSpam] Fwd: installing antennas at Prince Frederick Maryland tower
How much more money do we need to raise. (total cost?)
You don’t say in your email. I wasn’t at the meeting last night.
From: Dave Weaver <mailto:d.weaver7 at comcast.net>
Sent: Friday, September 04, 2015 8:49 AM
To: Calvert Amateur Radio Association - K3CAL <mailto:k3cal at mailman.qth.net>
Subject: [Norton AntiSpam][K3CAL] Fwd: installing antennas at Prince Frederick Maryland tower
Cara members
I have the estimate to put two antennas up on the tower.
If you are interested in this project . To proceed forward we will need help from our club members to pay for this installation. There is $1000 in the funds. We will need to raise the rest in about two weeks if we want to get it installed in a two-week period.
Dave W3PQS
-------- Original Message --------
Subject: RE: installing antennas at Prince Frederick Maryland tower
From: Vince Tinio <vince at teltronictowers.com>
Sent: Friday, September 4, 2015, 8:18 AM
To: David <d.weaver7 at comcast.net>
CC:
David,
I pretty much have the labor hours calculated but I’m concerned about the mounts you chose. The mount you have looks like it only stands out about 20” and is designed to be used on a straight leg, the tower is a tapered tower so even if we figured out a way to mount that side mount the antenna would be pretty close to the tower leg. We typically use a 3’ or a 6’ stand off mount kit designed to be used on a tapered tower, I have attached the spec sheets on this email.
I would recommend getting a different mount, we can order them or you can. So far, the labor I’ve calculated is $3,040.00. I will give a more formal quote as soon as we make a decision on the mounts.
Thanks,
Vince Tinio
Senior Construction Manager
Teltronic Towers Inc
Vince at teltronictowers.com
301-350-6400 Office
240-455-2578 Cell
logo
From: David [mailto:d.weaver7 at comcast.net]
Sent: Thursday, September 03, 2015 2:03 PM
To: Vince Tinio <vince at teltronictowers.com>
Subject: RE: installing antennas at Prince Frederick Maryland tower
Vince
this is the stuff I have gathered up more than I think we need take a look and see if it works for you
Dave
W3PQS
From: Vince Tinio [mailto:vince at teltronictowers.com]
Sent: Thursday, September 3, 2015 12:32 PM
To: David
Subject: RE: installing antennas at Prince Frederick Maryland tower
Which exact mount did you order? On the cut sheet you sent it shows a couple different ones. Would it be possible to take a picture of the hardware? It may be possible that the tower attachment is already included.
Thanks,
Vince
From: David [mailto:d.weaver7 at comcast.net]
Sent: Thursday, September 03, 2015 12:07 PM
To: Vince Tinio <vince at teltronictowers.com>
Cc: d.weaver7 at comcast.net
Subject: installing antennas at Prince Frederick Maryland tower
Vince
We have the cable 7/8” and a spool of 1/2” and connectors, grounding kit 1/2” three each, grounding kit 7/8” three each, snap in hangers 1/2", snap in hangers 7/8 “ , standoffs with strong arms 2EA , cable tray clamps one box ,1/2” support cushion to enter building , 7/8”support cushion to enter building.
We need you to provide universal mounts to the tower legs for the standoffs and strong-arm clamps. We have two kits that we will be installing each antenna will have its own standoff and strong-arm mount to the tower leg
I hope this information helps if I have forgot something please let me know. The cut sheet you asked for our in the attachments also there's a picture of the tower if you like to see it. This is the letter that I sent to Jeff I hope it helps
Dave Weaver
W3PQS
d.weaver at comcast.net
From: David [mailto:d.weaver7 at comcast.net]
Sent: Wednesday, August 5, 2015 4:10 PM
To: 'Bids at teltronictowers.com'
Cc: 'jeff at teltronictowers.com'; Bob Sheskin; Eric H. Christensen
Subject: installing antennas at Prince Frederick Maryland tower
Calvert Amateur Radio Association Inc.
P.O. Box 306, Huntingtown, Maryland 20639
www.k3cal.org
coax.bmp
Races Lgo.jpg arrl_logo (2).jpg ares logo (2).jpg
Hi Eric
Jeff asked me to send you this information on a bid for installing two antennas at the 170foot level.
On a state tower located in Prince Frederick Maryland at RT4 & 231.
We will be providing the cables connectors and hangers for this job.
I will need you to provide tower pipe clamps for our side mount kit to mount it on the tower leg see attachment above. The antennas will be at the 170 foot level another will be mounted below this one.
We will be mounting two antennas one DB224 And one DB416 each antenna is about 20 foot long.
Please help us we are ham radio club not a big business. We also are a 501 C3 we have a Maryland tax exempt number as well.
If you have any questions please call 240-882-0484 or email d.weaver7 at comcast.net
Thank you very much for your time
Dave Weaver
W3PQS
_____
______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.jpg
Type: image/jpeg
Size: 1961 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0006.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image007.jpg
Type: image/jpeg
Size: 2229 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0007.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image008.jpg
Type: image/jpeg
Size: 4555 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0008.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image009.jpg
Type: image/jpeg
Size: 3645 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0009.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image010.jpg
Type: image/jpeg
Size: 2167 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0010.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image011.jpg
Type: image/jpeg
Size: 3089 bytes
Desc: not available
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150904/6a1d7359/attachment-0011.jpg>
More information about the K3CAL
mailing list