[K3CAL] APRS

[James Tetlow]

Yeps, that's a long way to go to lunch! Merry Christmas  see you when you get back. 

Sent from my iPad,
Best Regards, 73,
Jim Tetlow

> On Dec 22, 2015, at 18:03, David Hardy via K3CAL <k3cal at mailman.qth.net> wrote:
> 
> I'm at least 600 miles away and in Canada.  Will bring it next week.  Thanks for the settings reminders.  
> 
> David Hardy   
> davehardy0101 at aol.com
> KB3RAN
>  
> 
> 
> -----Original Message-----
> From: Jim Tetlow <k3uga at comcast.net>
> To: Calvert Amateur Radio Association - K3CAL <k3cal at mailman.qth.net>
> Sent: Tue, Dec 22, 2015 1:55 pm
> Subject: Re: [K3CAL] APRS
> 
> Get you book and go back over your menu items to make sure all are set correct. Check your clock to be sure it is set EST and -5hours UTC. Make sure gps is flashing. Check your setting for RX beacons. 
> 
> If all fails bring to lunch tomorrow.
> 
> Sent from my iPhone,
> 73, k3uga
> Jim Tetlow
> k3uga at comcast.net
> 
> On Dec 22, 2015, at 13:18, David Hardy via K3CAL <k3cal at mailman.qth.net> wrote:
> 
> Now if I could figure out why my APRS is not working on my mobile radio.  It says it's beaconing and the GPS is on but I don't see that I'm hitting any nodes.  
> 
> David Hardy   
> davehardy0101 at aol.com
> KB3RAN
>  
> 
> 
> -----Original Message-----
> From: David Weaver <w3pqs at comcast.net>
> To: K3CAL <k3cal at mailman.qth.net>; Eric H . Christensen <eric at christensenplace.us>
> Sent: Tue, Dec 22, 2015 1:08 pm
> Subject: [K3CAL] APRS
> 
> Eric
> APRS is up and running. We found the APRS radio was set at 50 Watts 
> output it was interfering with the CARA repeater. After a lot of testing 
> with Chuck's AA3CS equipment we figured a how to solve this problem. The 
> APRS radio output is now set to 5 Watts output this should be more than 
> enough power to run APRS digital and cover this County. We are still 
> testing to see if this solves the problem.If you have any questions or 
> concerns please email me
> D.Weaver7 at Comcast.net
> David W3PQS
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20151222/28ee865b/attachment-0001.html>