[K3CAL] APRS

[David Hardy]

Now if I could figure out why my APRS is not working on my mobile radio.  It says it's beaconing and the GPS is on but I don't see that I'm hitting any nodes.  


David Hardy      
davehardy0101 at aol.com
    
KB3RAN
 



-----Original Message-----
From: David Weaver <w3pqs at comcast.net>
To: K3CAL <k3cal at mailman.qth.net>; Eric H . Christensen <eric at christensenplace.us>
Sent: Tue, Dec 22, 2015 1:08 pm
Subject: [K3CAL] APRS

Eric
APRS is up and running. We found the APRS radio was set at 50 Watts 
output it was interfering with the CARA repeater. After a lot of testing 
with Chuck's AA3CS equipment we figured a how to solve this problem. The 
APRS radio output is now set to 5 Watts output this should be more than 
enough power to run  APRS digital and cover this County. We are still 
testing to see if this solves the problem.If you have any questions or 
concerns please email me
D.Weaver7 at Comcast.net
David W3PQS
______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20151222/548f0f3f/attachment-0001.html>