[K3CAL] concrete drill

Sat Aug 15 20:20:28 EDT 2015

Really?  WTF is your problem? I asked a simple question. And even kidded
about it. Dont need your smart ass remarks!
On Aug 15, 2015 8:17 PM, "Edwin A Noell Jr" <enoell at verizon.net> wrote:

> Maybe you shouldn't have done that. It really sounds like a personal
> problem with you, because you're the only one complaining.
>
> On 08/15/2015 08:14 PM, W. Hackett wrote:
>
> Actually I disagree,  once it was established that chuck had drill, drill
> bits it should have went private. To much back and forth over the same
> thing will result in a message. That. Might have importance will get over
> looked!  I have this tied to my phone and every response alerts me.
> Needlessly.
> On Aug 15, 2015 7:37 PM, "W. Hackett" <n3xmz.md at gmail.com> wrote:
> >
> > Lol
> >
> > On Aug 15, 2015 7:25 PM, "David Weaver" <w3pqs at comcast.net> wrote:
> >>
> >> Yes it does
> >> If you're looking for a concrete drill
> >> Dave
> >>
> >>
> >>
> >> On August 15, 2015, at 7:17 PM, "W. Hackett" <n3xmz.md at gmail.com>
> wrote:
> >>
> >>
> >> No it does not!
> >>
> >> On Aug 15, 2015 7:01 PM, "David Weaver" <w3pqs at comcast.net> wrote:
> >>>
> >>> YES
> >>> DAVE
> >>>
> >>>
> >>>
> >>> On August 15, 2015, at 3:43 PM, "W. Hackett" <n3xmz.md at gmail.com>
> wrote:
> >>>
> >>>
> >>> Does all this back and forth need to be on reflector?
> >>>
> >>> On Aug 15, 2015 1:59 PM, "Richard Terlisner" <rterlisner at gmail.com>
> wrote:
> >>>>
> >>>> Largest one I have measures .395" dia.  It too is in rough shape,
> heavy use when building my deck several years ago.
> >>>>
> >>>> Eith a 3/8" bolt & anchor you're probablylooking at a vlose to a 1/2"
> drill.  If you think the .395" dia will work, you're welcome to it.
> >>>>
> >>>> On Aug 15, 2015 1:30 PM, "David Weaver" <w3pqs at comcast.net> wrote:
> >>>>>
> >>>>> I have 3/8 bolts and 3/8 anchors
> >>>>> Dave
> >>>>>
> >>>>>
> >>>>>
> >>>>> On August 15, 2015, at 11:44 AM, Richard Terlisner <
> rterlisner at gmail.com> wrote:
> >>>>>
> >>>>>
> >>>>> i found the 3/16" & 1/4" bits for some tapcons i used.  but they are
> both dead.  i might have a few more around that i know would fit a 3/8 or
> 1/2 chuck.  what diameter do you need should i come across them?
> >>>>>
> >>>>> On Sat, Aug 15, 2015 at 7:51 AM, Richard Terlisner <
> rterlisner at gmail.com> wrote:
> >>>>>>
> >>>>>> I'll check when I get home.  About an hour or so.
> >>>>>>
> >>>>>> On Aug 15, 2015 6:22 AM, "David Weaver" <w3pqs at comcast.net> wrote:
> >>>>>>>
> >>>>>>> 3/8 or 1/2c huck
> >>>>>>>
> >>>>>>> Dave
> >>>>>>>
> >>>>>>>
> >>>>>>>
> >>>>>>> On August 14, 2015, at 8:44 PM, Richard Terlisner <
> rterlisner at gmail.com> wrote:
> >>>>>>>
> >>>>>>>
> >>>>>>> What size?  I msy have a few.  I'll have to check.
> >>>>>>>
> >>>>>>> On Aug 14, 2015 3:02 PM, "David Weaver" <W3PQS at comcast.net> wrote:
> >>>>>>>>
> >>>>>>>> Hi
> >>>>>>>>
> >>>>>>>> I am looking to see if someone has a concrete drill they can let
> me use on Tuesday the 18th
> >>>>>>>>
> >>>>>>>> if you have one and I can borrow please let me know. Also if you
> have concrete drill bits I have some that fit a regular Chuck
> >>>>>>>>
> >>>>>>>> Dave Weaver W3PQS
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> ______________________________________________________________
> >>>>>>>> K3CAL mailing list
> >>>>>>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> >>>>>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>>>>> Post: mailto:K3CAL at mailman.qth.net
> >>>>>>>>
> >>>>>>>> This list hosted by: http://www.qsl.net
> >>>>>>>> Please help support this email list:
> http://www.qsl.net/donate.html
> >>>>>>>
> >>>>>>>
> >>>>>>> ______________________________________________________________
> >>>>>>> K3CAL mailing list
> >>>>>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> >>>>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>>>> Post: mailto:K3CAL at mailman.qth.net
> >>>>>>>
> >>>>>>> This list hosted by: http://www.qsl.net
> >>>>>>> Please help support this email list:
> http://www.qsl.net/donate.html
> >>>>>
> >>>>>
> >>>>>
> >>>>> ______________________________________________________________
> >>>>> K3CAL mailing list
> >>>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> >>>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>>> Post: mailto:K3CAL at mailman.qth.net
> >>>>>
> >>>>> This list hosted by: http://www.qsl.net
> >>>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>>
> >>>>
> >>>> ______________________________________________________________
> >>>> K3CAL mailing list
> >>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> >>>> Help: http://mailman.qth.net/mmfaq.htm
> >>>> Post: mailto:K3CAL at mailman.qth.net
> >>>>
> >>>> This list hosted by: http://www.qsl.net
> >>>> Please help support this email list: http://www.qsl.net/donate.html
> >>>
> >>>
> >>> ______________________________________________________________
> >>> K3CAL mailing list
> >>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> >>> Help: http://mailman.qth.net/mmfaq.htm
> >>> Post: mailto:K3CAL at mailman.qth.net
> >>>
> >>> This list hosted by: http://www.qsl.net
> >>> Please help support this email list: http://www.qsl.net/donate.html
> >>
> >>
> >> ______________________________________________________________
> >> K3CAL mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:K3CAL at mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net <K3CAL at mailman.qth.net>
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150815/dfea0e3d/attachment.html>