[K3CAL] concrete drill

[W. Hackett]

Does all this back and forth need to be on reflector?
On Aug 15, 2015 1:59 PM, "Richard Terlisner" <rterlisner at gmail.com> wrote:

> Largest one I have measures .395" dia.  It too is in rough shape, heavy
> use when building my deck several years ago.
>
> Eith a 3/8" bolt & anchor you're probablylooking at a vlose to a 1/2"
> drill.  If you think the .395" dia will work, you're welcome to it.
> On Aug 15, 2015 1:30 PM, "David Weaver" <w3pqs at comcast.net> wrote:
>
>> I have 3/8 bolts and 3/8 anchors
>> Dave
>>
>>
>> On August 15, 2015, at 11:44 AM, Richard Terlisner <rterlisner at gmail.com>
>> wrote:
>>
>>
>> i found the 3/16" & 1/4" bits for some tapcons i used.  but they are both
>> dead.  i might have a few more around that i know would fit a 3/8 or 1/2
>> chuck.  what diameter do you need should i come across them?
>>
>> On Sat, Aug 15, 2015 at 7:51 AM, Richard Terlisner <rterlisner at gmail.com>
>> wrote:
>>
>>> I'll check when I get home.  About an hour or so.
>>> On Aug 15, 2015 6:22 AM, "David Weaver" <w3pqs at comcast.net> wrote:
>>>
>>>> 3/8 or 1/2c huck
>>>>
>>>> Dave
>>>>
>>>>
>>>> On August 14, 2015, at 8:44 PM, Richard Terlisner <rterlisner at gmail.com>
>>>> wrote:
>>>>
>>>>
>>>> What size?  I msy have a few.  I'll have to check.
>>>> On Aug 14, 2015 3:02 PM, "David Weaver" <W3PQS at comcast.net> wrote:
>>>>
>>>>> *Hi*
>>>>>
>>>>> *I am looking to see if someone has a concrete drill they can let me
>>>>> use on Tuesday the 18th*
>>>>>
>>>>> *if you have one and I can borrow please let me know. Also if you have
>>>>> concrete drill bits I have some that fit a regular Chuck*
>>>>>
>>>>> *Dave Weaver W3PQS*
>>>>>
>>>>> ______________________________________________________________
>>>>> K3CAL mailing list
>>>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
>>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>>> Post: mailto:K3CAL at mailman.qth.net
>>>>>
>>>>> This list hosted by: http://www.qsl.net
>>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>>
>>>>
>>>> ______________________________________________________________
>>>> K3CAL mailing list
>>>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
>>>> Help: http://mailman.qth.net/mmfaq.htm
>>>> Post: mailto:K3CAL at mailman.qth.net
>>>>
>>>> This list hosted by: http://www.qsl.net
>>>> Please help support this email list: http://www.qsl.net/donate.html
>>>>
>>>
>>
>> ______________________________________________________________
>> K3CAL mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/k3cal
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:K3CAL at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>>
>
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20150815/e0401701/attachment.html>