[K3CAL] Need about a foot of 1 1/4" EMT conduit

[David Hardy]

Thanks Jim,  

I,m trying to make a sleeve to fit over 1" EMT.  That 1 1/2 might work.  Fence post sounds cheaper, too.

David Hardydavehardy0101 at aol.com



-----Original Message-----
From: k3uga at yahoo.com
To: 'Calvert Amateur Radio Association - K3CAL' <k3cal at mailman.qth.net>
Sent: Sat, Mar 16, 2013 2:21 pm
Subject: Re: [K3CAL] Need about a foot of 1 1/4" EMT conduit



Sorry do not have any RG62 or 1 ? emt on hand. Can?t help for short pcs. of RG 62 but if you know any cable installers or Comcast people, I believe they still use 62 for vertical and horizontal backbone. If you can?t find a piece of emt and you could substitute 1 ? size you can purchase chain link fence posts in 5 ft pcs, (home Depot) and that is lots cheaper than of 10? emt. 73's, DE k3ugaJim Tetlowk3uga at yahoo.comFrom: k3cal-bounces at mailman.qth.net [mailto:k3cal-bounces at mailman.qth.net] On Behalf Of David Hardy
Sent: Saturday, March 16, 2013 4:58 PM
To: K3CAL at mailman.qth.net
Subject: [K3CAL] Need about a foot of 1 1/4" EMT conduitI don't have any RG 62,sorry. I'm looking for a scrap piece of inch and a quarter EMT conduit for a mast project I'm working on. Anybody have an old piece lying around? ThanksKB3RANDavid Hardy
davehardy0101 at aol.com

______________________________________________________________
K3CAL mailing list
Home: http://mailman.qth.net/mailman/listinfo/k3cal
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:K3CAL at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://mailman.qth.net/pipermail/k3cal/attachments/20130317/376bff4f/attachment.html>