[K3CAL] interesting intermod read

[Bob N3PPH]

That is interesting. I think when Ron gets time to check his analyzer we 
can check the exact problem and document it before we spend money we may 
not need to. If we are lucky someone else needs to align their equipment 
properly and everyone is happy. We just would need to be there when 
things are busy.

73,
Bob N3PPH


On 7/26/2011 11:22 AM, Jim Tetlow wrote:
>
> All-FYI
>
> While researching a filter for intermod. Most were limited to HT's and 
> lower power transceivers; not repeaters. I did however find a link on 
> eHam.net which I have attached above. Read review by NM7R; this may 
> warrant some investigation of PAR notch filters (I think we are 
> looking at a different frequency as 39mhz or so ) but these can be 
> built custom, still under $100.00 and he used this on a repeater. The 
> downside it may limit sensitivity on receive side. Just a thought, 
> comments encouraged.
>
> Regards,
>
> Jim Tetlow
>
> **K3UGA******
>
> jimtetlow at chesapeake.net <mailto:jimtetlow at chesapeake.net>
>
>
>
> ______________________________________________________________
> K3CAL mailing list
> Home: http://mailman.qth.net/mailman/listinfo/k3cal
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:K3CAL at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://mailman.qth.net/pipermail/k3cal/attachments/20110726/ad980476/attachment.html