[Johnson] viking invader problerm

[David C. Hallam]

I have a procedure for the alignment of the 9MHz oscillator that is an 
improvement over that in the manual.  It's in an old letter from Johnson 
about the procedure used in the factory.  I don't have time to dig it 
out right now, but I will this evening.

David
KW4DH

On 11/19/2015 12:17 PM, ed wirtz wrote:
> Hi,
>
> I've got a cranky Invader 200. No output at all and the 9MHz amplifier 
> output is low. VFO output is normal and the het oscillators are 
> normal. T2 is good. The 9MHz crystal oscillator output seems low as 
> well. tubes are good and resistors seem to be reasonably in tolerance.
>
> Any ideas?
>
> Thanks and 73,
>
> Ed, KØBKA
>
> ______________________________________________________________
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Johnson at mailman.qth.net
> Message delivered to dhallam at knology.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> -- 
> There are two possible outcomes: if the result confirms the hypothesis, then you've made a measurement.
> If the result is contrary to the hypothesis, then you've made a discovery.
> Enrico Fermi