[Johnson] Valiant Pi Net Caps

[Dave Harmon]

I would start at RF Parts and look at the doorknobs.

Dave Harmon
K6XYZ[at]sbcglobal[dot]net
Sperry, Ok.


-----Original Message-----
From: johnson-bounces at mailman.qth.net
[mailto:johnson-bounces at mailman.qth.net] On Behalf Of Lawrence Steeno
Sent: Monday, February 20, 2012 9:17 PM
To: johnson at mailman.qth.net
Subject: [Johnson] Valiant Pi Net Caps

I have 2 Valiant transmitters here with shorted, or leaky caps in the PI
network. These are in the coupling circuit. The 300 mmf cap is the worst and
the octagon 3 section not much better.
I have tried ceramic 2KV and also snubber caps all of which do not last very
long. Does anyone have any suggestions as to where I can find the 4
different caps to replace these in at least 2 units and there is another one
at another location with strange loading at times. Any suggestions sure will
be appreciated. 
Thanks
Larry Steeno K9LWI
UX201A at hotmail dot com

______________________________________________________________
Johnson mailing list
Home: http://mailman.qth.net/mailman/listinfo/johnson
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Johnson at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html