[Johnson] WTB Valiant dow key plug

[Larry WA9VRH]

Hi Dutch,

If your talking about the ac connection for the dow key I use and old 
crystal. Unsolder the cover and take the crystal out,
drill a hole in the top of the holder and solder back together. I 
usually wrap the wire or use heat shrink tubing to keep from cutting 
into the
wire.

If you need a crystal with the small pins let me know I should have an 
extra.

73 Larry WA9VRH



On 2/5/2012 7:20 AM, Jim wrote:
> For my Ranger I soldered #12 solid wire to zip cord and covered the joint
> with shrink tubing.
> Jim
>
>
>> I am looking fr the plug for the Johnson Valiant dow key plug, any
>> avaliable or a source for them???
>>
>> 73's Dutch WB7DYW
>> CCA Member # AC99-00918
>> Please visit my website: www.wb7dyw.com
>>
>> "Life is not a journey to the grave with the intention of arriving safely
>> in a handsome and well-preserved body, but rather to skid in sideways,
>> thoroughly used up, totally worn out, a cold beer in one hand ... and a
>> big hot greasy hamburger in the other and screaming: 'Woo Hoo! What a
>> ride!"
>>
>>