[Johnson] Ranger I Driver Transformer

[Singley, Rodger]

Mike,

I used the Antique Electronic Supply (www.tubesandmore.com) P-T156 in a
couple of my Johnson transmitters for replacement.  These are 3 to 1
inter-stage transformers designed for coupling from plate to push/pull
grids.  If you are going for highly modified audio, one of the heavier
core units might make sense but for stock audio these work fine.
Hammond has a number of units available also and they are likely the
source for the one Antique sells.


Rodger WQ9E


> -----Original Message-----
> From: johnson-bounces at mailman.qth.net [mailto:johnson-
> bounces at mailman.qth.net] On Behalf Of Michael Hardie
> Sent: Wednesday, September 30, 2009 1:07 PM
> To: johnson at mailman.qth.net
> Subject: [Johnson] Ranger I Driver Transformer
> 
> Does anyone know the specs for the Ranger I driver transformer?  The
> manual
> has the DC resistances as 135 ohms primary and 270 ohms secondary but
I
> need
> the impedance and power specs.
> 
> Mike VE7MMH
> 
> ______________________________________________________________
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Johnson at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html