[Johnson] VIKING II PARASITIC SUPPRESSOR QUESTION

[Rodger]

Looks like a 2 watt 47 ohm carbon comp with 8 turns of what I think is  
#16 wire.  Otherwise, there is nothing special or unusual about it.

Rodger WQ9E

 SX-25 wrote:
> Hello gents...
>
> I've started work on a Johnson Viking II that arrived in my fleet without its parasitic suppressors that connect the plates of the 6146s. The suppressors are designated "L11" and "L12" however the schematic shows them as coils and resistors without value. I am assuming it is the usual resistor with a few turns of wire wound around it. Can anyone peer inside their VIKING II and tell me what value resistor is used as well as how many turns (and what gauge) wire is used for the coil? If it uses some sort of other proprietary component design I'd appreciate any additional info you can offer.
>
> Thanks. 
>
> WA9VLK
> ______________________________________________________________
> Johnson mailing list
> Home: http://mailman.qth.net/mailman/listinfo/johnson
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Johnson at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>
>