[Johnson] 10 Turn Potentiometers

[David C. Hallam]

I want to replace the carrier balance pots on a Pacemaker.  I don't know if
wire wound pots would be suitable.

David
KC2JD/4

> -----Original Message-----
> From: Glen Zook [mailto:gzook at yahoo.com]
> Sent: Tuesday, June 17, 2008 11:15 AM
> To: Johnson List; dhallam at rapidsys.com
> Subject: Re: [Johnson] 10 Turn Potentiometers
>
>
> Depends if you want wirewound or "normal".  Mouser has wirewound
> 2K 10 turn with 0.25 inch shafts at $9.48 each.  Part number
> 882-MW22B-10-2K.
>
> They also have other versions in various sizes around the same
> price.  You would have to see if the physical size will fit.
>
> They have "precision" carbon potentiometers but they are all single turn.
>
> Mouser is at http://www.mouser.com
>
> or telephone (800) 346-6873
>
> No minimum order in the United States, Canada, or Mexico.
>
> Glen, K9STH
>
> Website:  http://k9sth.com
>
>
> --- On Tue, 6/17/08, David C. Hallam <dhallam at rapidsys.com> wrote:
>
> Does anyone know of a reasonably priced source for 10 turn
> potentiometers? I need 2 - 2K pots with a 1/4" shaft.  I need the
> short variety.  I can't use the ones that are a inch or two long.
>  They won't fit.  Surplus Sales of Nebraska is out of stock on
> the one I need and Dan's Small Parts has them but is not
> accepting orders right now because of an injury to Dan.
>
>
>
>
>
>
>