[Johnson] Invader Resistance Chart

[David C. Hallam]

Does anyone know of any errors in the Viking Invader's manual resistance
chart?

At pin 2, the triode section grid, of V3, the 6CX8 heterodyne oscillator, my
chart gives the resistance as 10K.  I get an actual reading of about 100
ohms.  Looking at the schematic, there is a 10K ohm resistor paralleled with
a 100 ohm resistor connected to this pin.  The other ends of the resistors
go to ground.  To my way of thinking, this should give a reading close to
100 ohm not 10K ohm as per the chart.

Is there a chart error or have I missed something?

David C. Hallam
KC2JD