[Johnson] WTB: P-10 plug for Valiant II

Tue, 12 Feb 2002 08:02:03 -0800

You know, they are still in the little box! I didn't know you still needed
them. Geeze! I must have pulled them off the parts Viking II 3 or 4 years
ago. I'll still check on the plug, I'm pretty sure I have the socket and
back shell but not sure on the 5 pin males. Over the years a collection
4,5,6,7,8,9,11 pin plugs/sockets has been gleaned from swapmeet squeezin's.
So how have you been? I thought you off loaded your Johnson gear???
EdZ

-----Original Message-----
From: [email protected]
[mailto:[email protected]]On Behalf Of Cal Eustaquio
Sent: Tuesday, February 12, 2002 7:43 AM
To: [email protected]
Subject: RE: [Johnson] WTB: P-10 plug for Valiant II

Hi Ed:
So, when are you going to get me those Johnson knobs? :^). Cal.

---- Original Message ----
From: [email protected]
To: [email protected],
Subject: RE: [Johnson] WTB: P-10 plug for Valiant II
Date: Tue, 12 Feb 2002 07:38:19 -0800

>Have been away and am just catching up on email. I can check for the
>plug
>when I go home at lunchtime. Will look at my 10A too. This 10A was
>saved
>from a dumpster death but has no coils. Is it worth the effort to
>get the
>10A working??
>
>
>Does anyone have a spare plug (P-10 male that plugs into J-9 female
>on
>the back of the transmitter) for the Valiant II? This is the 5 pin
>plug
>that is used to interface the control circuits for external gear
>like an
>SSB adapter.
>......
>The plug is roughly 9/16" to 5/8" in diameter and has the following
>pin
>orientation:
>
>    0
>  0   0
>   0 0
>
>Thanks & 73, Ray
>_______________________________________________
>Johnson mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/johnson
>
>_______________________________________________
>Johnson mailing list
>[email protected]
>http://mailman.qth.net/mailman/listinfo/johnson
>

_______________________________________________
Johnson mailing list
[email protected]
http://mailman.qth.net/mailman/listinfo/johnson