[JMS] Wanted: Millen 90881 Band Coils

[UNADILLA - Corporate]

Hello  Paul.    Compliments  on your 90881 project.
The Millen manual speaks of two series of coils. The 42000 and 43000.  Our
inventory is near extinction but when that happens we have the basic parts
to
construct. But now we have all or nearly all in stock.
So, can you provide Millen part numbers, for quick
response.
Thank you  73  Ralph

On Wed, May 11, 2016 at 7:11 PM, Paul Christensen <w9ac at arrl.net> wrote:

> Looking for 160m through 20m coil sets for the 90881 500W Millen amp.  I
> know they're scarce but please keep me in mind if you have, or find extra
> coil sets.  I already have the 10m set.
>
> Two weeks ago, I refinished the front panels on Millen 90281 HV and Lambda
> Model 28 power supplies.  I followed the instructions on the VHT wrinkle
> paint can and would you believe it turned out like a factory job?  When the
> XYL was out, I used the kitchen oven and set it to 160 degs.  Applied heat
> for 15 minutes and the job was done.
>
> I did depart from the instructions with the application of a light gray
> primer after extensive sanding.  Application of the primer was worrisome
> but
> with three heavy coats of VHT, the paint still builds into a consistent
> black wrinkle finish.  I had previously encountered paint flaking on some
> old gear that wasn't primed.   So, pretty happy it turned out okay.
>
> I'll post links to photos on my QRZ.com page when it's all racked up.
>
> Paul, W9AC
>
> ______________________________________________________________
> James_Millen_Society mailing list
> Home: http://mailman.qth.net/mailman/listinfo/james_millen_society
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:James_Millen_Society at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>