[JMS] [FWD: 90831Modulator Outline Plus]

[corporate]

     -------- Original Message --------
     Subject: 90831Modulator Outline Plus
     From: corporate <corporate at jamesmillenco.com>
     Date: Sun, December 03, 2006 5:11 pm
     To: james_millen_society at mailman.qth.net

   HI  ALL--  THE  90831/90801 PROJECTS, stirred me up, and i resurrected
   the  panel  outline  from my Millen Historical Drawings, (I don't have
   all  or  have  searched  all  yet.)  but  maybe  this  will help.  See
   attachment.  I may have a few square

   meter cases, w/o movements available.  Sold my last completed one last
   week.

   73    Ralph   James Millen Company







     -------- Original Message --------
     Subject: Re: [JMS] Modulator front panel
     From: "ronnie.hull" <ronnie.hull at glowbugs.com>
     Date: Sat, December 02, 2006 10:52 am
     To: The James Millen Society Members Email Reflector
     <james_millen_society at mailman.qth.net>
     yes  it  is  the later version with the square meter. Sorry guess I
     should have
     pointed that out.
     Ronnie
     On Sat, 2 Dec 2006 08:19:36 -0600, thomsa wrote
     > Hi Ronnie,
     >
     >  If  you  are trying to build the later type (style), I can check
     the
     > dimensions from my
     > modulator. You can check the photo against what you are trying to
     > build from the online JMS site photos.
     >
     > Tom  N5AMA
     >
     > ----- Original Message -----
     > From: "ronnie.hull" <ronnie.hull at glowbugs.com>
     > To: "James Millen Society" <james_millen_society at mailman.qth.net>
     > Sent: Saturday, December 02, 2006 7:10 AM
     > Subject: [JMS] Modulator front panel
     >
     > > Howdy fellers
     > >
     >  >  well Im going to once again attempt to build this front panel
     and
     > > hopefully
     > > not waste a third one LOL
     > >
     > > I just made the measurements again and here is what I have. Can
     someone
     > > PLEASE check me against thier complete modulator?
     > >
     >  >  just  so  you'll  know  what  I"m doing, I bought a brand new
     modulator from
     > > Millen last year that was the last one they had, and it was not
     complete.
     > > The
     >  >  front  panel  is missing as are the covers and meter. So, I'm
     trying to
     > > homebrew a front panel.
     > >
     >  >  the side braces for the modulator itself appear to be 1" from
     either end
     > > of
     > > the panel.
     > >
     > > The Microphone connector is 2" in from the end of the left side
     of the
     > > panel.
     > >
     > > The Gain Control is 4 1/8" in from the left side of the panel (
     this is
     > > the
     > > one I keep gettin offset )
     > >
     > > The meter is of course, centered, no rocket science there
     > >
     > > the CW/Phone switch is 4" in from the right side of the panel.
     > >
     >  > Now, I suspect the Gain Control is 4" in too but no matter how
     I measure
     > > it
     >  >  on  my  modulator,  it  is  4 1/8"    Could this be a factory
     booboo?
     > >
     > > Whenever I DO get a good panel done I will need to get some art
     work so I
     > > can
     > > silk screen it to look like the original.
     > >
     > > Thanks in advance for your help y'all
     > >
     > > red beans and ricely to ya from Louisiana
     > >
     > > Ronnie - W5SUM
     > > ______________________________________________________________
     > > James_Millen_Society mailing list
     > > Home:
     http://mailman.qth.net/mailman/listinfo/james_millen_society
     > > Help: http://mailman.qth.net/faq.htm
     > > Post: mailto:James_Millen_Society at mailman.qth.net
     > >
     >
     > ______________________________________________________________
     > James_Millen_Society mailing list
     > Home:
     http://mailman.qth.net/mailman/listinfo/james_millen_society
     > Help: http://mailman.qth.net/faq.htm
     > Post: mailto:James_Millen_Society at mailman.qth.net
     ______________________________________________________________
     James_Millen_Society mailing list
     Home: http://mailman.qth.net/mailman/listinfo/james_millen_society
     Help: http://mailman.qth.net/faq.htm
     Post: mailto:James_Millen_Society at mailman.qth.net