[JMS] Modulator front panel

[thomsa at sbcglobal.net]

Hi Ronnie,

If you are trying to build the later type (style), I can check the 
dimensions from my
modulator. You can check the photo against what you are trying to build from 
the
online JMS site photos.

Tom  N5AMA


----- Original Message ----- 
From: "ronnie.hull" <ronnie.hull at glowbugs.com>
To: "James Millen Society" <james_millen_society at mailman.qth.net>
Sent: Saturday, December 02, 2006 7:10 AM
Subject: [JMS] Modulator front panel


> Howdy fellers
>
> well Im going to once again attempt to build this front panel and 
> hopefully
> not waste a third one LOL
>
> I just made the measurements again and here is what I have. Can someone
> PLEASE check me against thier complete modulator?
>
> just so you'll know what I"m doing, I bought a brand new modulator from
> Millen last year that was the last one they had, and it was not complete. 
> The
> front panel is missing as are the covers and meter. So, I'm trying to
> homebrew a front panel.
>
> the side braces for the modulator itself appear to be 1" from either end 
> of
> the panel.
>
> The Microphone connector is 2" in from the end of the left side of the 
> panel.
>
> The Gain Control is 4 1/8" in from the left side of the panel ( this is 
> the
> one I keep gettin offset )
>
> The meter is of course, centered, no rocket science there
>
> the CW/Phone switch is 4" in from the right side of the panel.
>
> Now, I suspect the Gain Control is 4" in too but no matter how I measure 
> it
> on my modulator, it is 4 1/8"    Could this be a factory booboo?
>
> Whenever I DO get a good panel done I will need to get some art work so I 
> can
> silk screen it to look like the original.
>
> Thanks in advance for your help y'all
>
> red beans and ricely to ya from Louisiana
>
> Ronnie - W5SUM
> ______________________________________________________________
> James_Millen_Society mailing list
> Home: http://mailman.qth.net/mailman/listinfo/james_millen_society
> Help: http://mailman.qth.net/faq.htm
> Post: mailto:James_Millen_Society at mailman.qth.net
>