[JMS] success with 90903

[ronnie.hull]

this morning, while talking in a huge roundtable, I changed out every cap in 
the little 90903 scope. This one is the early version. It now works 
beautifully. It was occasionally blowing a fuse. There is not much in there 
to cause this. I discovered the .05 mica  is in the A/C line was leaking. I 
removed it, didn't replace it, all is well. Has a good clean green trace with 
plenty of intensity and dang if it doesn't focus dead in the center of the 
focus pot.

Now.. to get to work on the later version 90903 I have here. I'll work on it 
later today

73's y'all

Ronnie - W5SUM