[ICOM] Dual Bander, HF rig, Desk Mic, and more FS

[Ken, W8EK]

Icom HF Transceiver, Dual Band
Transceiver,
Desk Microphone, and more For Sale:

.

Icom IC-3200A Dual Band Transceiver:

The Icom IC-3200A is a dual band mobile FM
transceiver with 25 watts output on both 2
meters and 440 MHz. 5 watts on low. This rig
has an LCD display.

Receive range is 140-150 and 440-450 MHz.
There is a built-in duplexer, so only one
antenna is required.

Requires 7.5 Amps at 13.8 VDC.
5.5 x 2 x 8.5 inches
-
Features:
Program Scan
Memory Scan
10 Memories
Memory Lockout
Compact Package
Dual VFOs
Scan Functions
Hand Mic

Most of the things I sell work 100% and look
close to new. This one works 100% electrically,
but cosmetically it is not as good as most. Maybe
a 7 of 10. The mic looks exceptionally good.
It works fine.

CD with both operating and service manuals included
for only $135.

.

Icom IC-701 HF Transceiver:

The Icom IC-701 Maximizer is a completely
solid state transceiver covering six amateur HF
bands. It features two digitally synthesized
10 Hz VFOs. Enhancements include RF speech
processor, RIT, CW break-in, noise blanker and
VOX. The 701 has has a triple-conversion
receiver, and features continuously variable
bandwidth, speech processor, VOX, and 100 Hz
digital display. Up to 100 W power out.
It requires 13.5 VDC at 18 Amps.

Features:
Multi Mode
Analog S/RF Meter
160 - 10 Meters
100 Hz Display
Variable RF Output
Dual VFOs
VOX
RF Speech Processor
Dial Lock
Variable SSB/RTTY Bandwidth
RIT
Noise Blanker

This one has a 500 Hz CW crystal filter in it.

Although this was Icom's first HF rig, it
has many advanced features. It works as
it should, and hard to believe, but it looks
like new. The new plastic is still on the
handle!

With paper work, CW Filter and power cord
for only $450.

.

Icom SM-2 Gooseneck Desk Microphone:

I am fairly certain that this desk microphone
is an Icom SM-2. It was used with an Icom
IC-701 HF transceiver, and the SM-2 is listed
as the desk mic that goes with it. There is no
actual marking on the mic identifying it as an
SM-2, but it looks like the pictures.

This desk mic has a gooseneck on it, similar to
the Icom SM-5, SM-6, and others. It has a single
page of SM-2 paper work with it.

It works as it should, and looks like new.
No scratches of any sort.
Four pin plug, wired for Icom.

Only $80.

.

Icom IC-781 Parts and Pieces:

I am attempting to offer these parts in hopes
that people may be able to keep a couple of
these units working longer.

I have a lot of the metal work available, so if
you have a unit that got mechanical damage, I
likely can help.

I have many circuit boards available, but some
are gone as well.

All of the CRT and display parts are gone, as
are the rear heat sink with finals, antenna tuner,
and power supply.

Other parts are available.

If you have a need for a certain part,
please let me know, and hopefully I can help.

.


I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.




.