[ICOM] Icom Mics, Filter, and more FS

[mparkinson1 at socal.rr.com]

I would like to have both Microphones  HM 36 and HM12 
Thanks Matt P 
W6pkn

-----Original Message-----
From: icom-bounces at mailman.qth.net <icom-bounces at mailman.qth.net> On Behalf
Of Ken, W8EK
Sent: Sunday, November 22, 2020 2:29 PM
To: Icom List <icom at mailman.qth.net>
Subject: [ICOM] Icom Mics, Filter, and more FS


Icom Items For Sale:

.

Hand Microphones for Icom:

Icom HM-36
This is the standard hand microphone that comes with many modern Icom rigs
when new.
Round 8 pin connector, and up and down switches.
It works 100% and looks like new. $30

Icom HM-12
This mic looks very similar to the HM-36 above, and functions much the same.
It is a dynamic mic instead of electret, however.
Round 8 pin plug.
It works 100% and looks very close to new.  $30

Icom HM-8, DTMF Touch Tone
16 digit DTMF Pad with on/off switch.
Add your own connector.
It works fine and looks fine.
With paper work for $30.

.

Icom FL-96 Crystal Filter:

The following filter is used in the 455 KHz IF.
It fits a very wide variety of Icom rigs, including the IC-703, IC-718,
IC-736, IC-738, IC-746, IC-751, IC-756, IC-780, IC-781, IC-R75, IC-R8500,
and probably others.

Icom FL-96, 2800 Hz, used for wide SSB, $110

.

Rig Programming Software/hardware:

These days the rigs have so many memories plus other features, that it is
almost impossible to program them manually. This takes care of this problem,
by letting you use the computer to program.

WCS-Q7 for Icom IC-Q7 and maybe others

For programming an Icom IC-Q7A, and
maybe others. $29

.

I also have a variety of speaker microphones that can be used on Icom rigs,
but are not made by Icom.  They have the 3.5 mm and 2.5 mm dual plugs
(spaced about 1/2 inch apart) on them.  Manufacturers such as MAHA, MFJ,
Radio Shack, Cobra, Alinco, etc.
Please inquire.

.

Original Empty Boxes:

All are original boxes that also include the inserts that came with them
when new.
Some may even have plastic bags.

Icom BC-74 A battery $3
Icom BP-208 battery $3
Icom CM-3 battery pack $3
Icom CR-64 High Stab Crystal $3
Icom EX-106 FM unit $4
Icom EX-310 Voice Synth $3
Icom FL-30 Filter $3
Icom HM-95 Mic $4
Icom IC-27, 2 m Xcvr $15
Icom IC-728 HF Xcvr $20
Icom IC-V8 HT $12
Icom MB-5 Bracket $3
Icom MB-105 bracket $3
Icom MB-62 mobile bracket $5
Icom OPC-581 extension cable $5
Icom SM-30 desk mic $8

These are original boxes only.

.

Icom BC-110 A Battery Charger for IC-W31 HT
12 V DC at 200 ma - Original Icom - $15

.

Icom IC-781 Parts and Pieces For Sale:

I am attempting to offer these parts in hopes that people may be able to
keep a couple of these units working longer.

I have a lot of the metal work available, so if you have a unit that got
mechanical damage in shipment, I likely can help.

I have many circuit boards, but many are gone as well.

Here are some of the items that I have available:

Left side inside panel. About 12 1/2 x 6 inches with a large rectangular
hole in the middle. Good shape. $10

Right side inside panel. About 12 1/2 x 6 inches with a smaller rectangular
hole off to one side. Good condition.
$10

Automatic Antenna tuner. Complete housing about 6 1/2 x
5 x 4 inches, including the two motors. Also has some wiring harnesses. $100

Plus many other parts.

.

I also have many other accessories available such as many different types of
microphones, HTs, VHF and UHF rigs, HF and VHF/UHF antennas, connectors,
miscellaneous accessories, etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net Voice Phone (352) 732-8400



.




.

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html