[ICOM] Icom HF Rig, Filter, Mics and much more FS

[Ken, W8EK]

Icom items For Sale:


Icom IC-726, HF plus 6 m Transceiver:

The Icom IC-726 covers all ham bands for 160
to 6 meters. There is a sensitive 500 kHz to
30 MHz general coverage receiver built in.
Operate SSB, CW, AM, or FM with powers up
to 100 watts. It features dual digital VFOs,
all mode squelch, built in speaker, snap down
tilt bar, built in 10 dB pre-amp, a 20 dB
attenuator. Enjoy 26 memories and three types
of scanning.

It requires 13.8 VDC at 20 amps.
Either the optional FL-100 (500 Hz) or FL-102
(6000 Hz) may be installed (but not both).

Features:
All Mode
Analog S/RF Meter
160-6 Meters
10 Hz Tuning
All Mode Squelch
10 Hz Display
CW break-in
Sharp LCD
26 Memories
Dial Lock
RIT
Preamp
Noise Blanker
Scanning

This particular radio is immaculate.
It works 100% and looks perfect.
No scratches or defects of any sort.

It is in its original box, with mic, power cord,
and manual for only $350.

.

ICOM PP-1 Vintage Speaker and Phone Patch:

This is a very nice Icom speaker, similar to the
SP-3, but with a phone patch added. It functions
as a nice speaker if you do not need the phone
patch portion.

The phone patch portion permits one to connect
their station (both transmit and receive) to the
phone line.

It is just the right accessory to complete your
vintage ICOM station, or use it just for the speaker.

This one works fine. It has connectors for round
Icom 8 pin mics, and a modular phone line connector.

Cosmetically, it looks extremely nice.
Buy it with paper work for only $50.

.

Icom FL-96 Crystal Filter:

The following filter is used in the 455 KHz IF.
It fits a very wide variety of Icom rigs, including the
IC-703, IC-718, IC-736, IC-738, IC-746, IC-751, IC-756,
IC-780, IC-781, IC-R75, IC-R8500, and probably others.

Icom FL-96, 2800 Hz, used for wide SSB, $110

.

Icom MB-51 Mounting Bracket:

The MB-51 is an odd mounting bracket that is not often found
in ham circles. It can attach to a dash and swivel to
most any direction. It has a screw to take "head mounts"
such as the MB-63 for the IC-706, or the head of the IC-2800.
Basically it is an additional way to mount a remote
head. It is chrome plated, and really looks great.

Only $37 plus shipping from Florida.

.

Rig Programming Software/hardware:

These days the rigs have so many memories plus
other features, that it is almost impossible
to program them manually. This takes care of
this problem, by letting you use the computer to
program.

WCS-Q7 for Icom IC-Q7 and maybe others

For programming an Icom IC-Q7A, and
maybe others. $29

.

Original Empty Boxes:

All are original boxes that also include the
inserts that came with them when new.
Some may even have plastic bags.

Icom BC-74 A battery $3
Icom BP-208 battery $3
Icom CM-3 battery pack $3
Icom CR-64 High Stab Crystal $3
Icom EX-106 FM unit $4
Icom EX-310 Voice Synth $3
Icom FL-30 Filter $3
Icom HM-95 Mic $4
Icom IC-27, 2 m Xcvr $15
Icom IC-728 HF Xcvr $20
Icom IC-V8 HT $12
Icom MB-5 Bracket $3
Icom MB-105 bracket $3
Icom MB-62 mobile bracket $5
Icom OPC-581 extension cable $5
Icom SM-30 desk mic $8

These are original boxes only.

.

Hand Microphones for Icom:

Icom HM-36
This is the standard hand microphone that comes with
many modern Icom rigs when new. Round 8 pin
connector, and up and down switches.
It works 100% and looks like new. $30

Icom HM-12
This mic looks very similar to the HM-36 above,
and functions much the same.  It is a dynamic
mic instead of electret, however.
Round 8 pin plug.
It works 100% and looks very close to new.  $30

Icom HM-8, DTMF Touch Tone
16 digit DTMF Pad with on/off switch.
Round 8 pin connector.
It works fine and looks fine.
With paper work for $30.

Icom HM-56 A, DTMF Touch Tone Microphone
16 digit DTMF Pad.
Round 8 pin connector.
This one works fine and looks fine.
Paper work is included for $40.

.

I also have a variety of speaker microphones
that can be used on Icom rigs, but are not made by
Icom.  They have the 3.5 mm and 2.5 mm dual plugs
(spaced about 1/2 inch apart) on them.  Manufacturers
such as MAHA, MFJ, Radio Shack, Cobra, Alinco, etc.
Please inquire.

.

Icom BC-110 A Battery Charger for IC-W31 HT
12 V DC at 200 ma - Original Icom - $15

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.





.