[ICOM] Microphones for Icom FS

[Ken, W8EK]

Microphones for Icom For Sale --

.

Heil HMM for Icom
This mic was designed for superior articulation.
It is a full range dynamic mic, and has a round
8 pin connector on it.

It works 100% and looks close to new.
Only $60.

.

Icom HM-36

This is the standard hand microphone that comes with
many modern Icom rigs when new. It has a round 8 pin
connector, and also has up and down switches on top.

This one works fine and looks like new. $30

.

Icom HM-12

This hand mic is very similar to the HM-36 above,
except it has a dynamic element.

It works 100% and looks close to new.

Only $30.

.

Icom HM-14 DTMF Touch Tone Mic

16 digit DTMF pad, with on-off switch, plus
up/down and PTT switches. Round 8 pin plug.

It works 100% and looks close to new.
Only $40.

.

Icom HM-56 A, DTMF Touch Tone Microphone

This DTMF hand mic works with the Icom IC-
28,
IC-38, IC-228, IC-229, IC-449, IC-901, IC-1201,
IC-2330, IC-2400, IC-2410, IC-2500, and probably
others.  Actually, it probably works with any Icom
rig that has a round 8 pin connector with a polarizing
voltage for the electret element.

This one works fine and looks fine.

Paper work is included for $40.

.

Icom HM-8 DTMF Touch Tone Microphone

This mic works with the Icom 25A, 245, 290, 402,
202S, 451, 471A, and others.  It has a 16 digit DTMF
Touch Tone pad on the front, along with a switch to
turn it on and off.  Of course it has the normal PTT
switch as well.  It has a round 8 pin connector.

This one works fine.  The coiled cord, which often
stretches, is in very nice shape.

With paper work for only $35.
.

.
Icom HM-8 DTMF Touch Tone Microphone

Same as above HM-8, except for no connector on it.

With paper work for $25.

.

Hand Microphone for Icom IC-230

This is an oldie, but goodie.

Of course the IC-230 was the first fully synthesized
Icom 2 meter rig.

If you have an IC-230 without the mic this is just
what you need!

It is a dynamic mic (no polarizing voltage needed),
and has a round 3 pin connector on it, which of
course can be changed.

Only $25.

.

Icom HM-46 L
Nice compact speaker mic that sounds great.
Looks like new. $18

.

Speaker Mic used on IC-Q7A

No model number on this one.  It has a single,
4 conductor, 3.5 mm plug on it.

It probably can be used on any of the Icom HTs that
use the single 4 conductor plug.

It works 100% and looks close to new.

Only $18.

.

I also have a variety of speaker microphones
that can be used on Icom rigs, but are not made by
Icom.  They have the 3.5 mm and 2.5 mm dual plugs
(spaced about 1/2 inch apart) on them.  Manufacturers
such as MAHA, MFJ, Radio Shack, Cobra, Alinco, etc.
Please inquire.

.

I also have many other accessories available such as many
different types of microphones, HTs, VHF and UHF rigs, HF
and VHF/UHF antennas, connectors, miscellaneous accessories,
etc.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.


.