[ICOM] IC-3210A No backlight

[Jeff Comcast]

Guillermo,
Thank you for your advice. I downloaded a service manual. I will let you
know what I find once I get it on bench.

D. Jeffrey Garth
621 Greenbriar Drive
Williamstown, NJ 08094-1149
73, WB2ZBN
Club Publications
www.w2mmd.org

"Choose a job you love, and you will never have to work a day in your life"
- Confucius


-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On
Behalf Of GGLL via Icom
Sent: August 01, 2020 14:03
To: icom at mailman.qth.net
Subject: Re: [ICOM] IC-3210A No backlight

	GA, you should check the logic unit board, there are four lamps
which are fed through a transistor dimmer regulator.

Most probably are open filament, but you should measure first).

Service manual with schematics is available on the web.

Regards
Guillermo - LU5WE.

El 1/8/20 a las 14:05, Jeff Comcast escribi�:
> I have an ICOM IC-3210A. The backlight on LCD display is out. A Google 
> search did not reveal anything specific to this model number. The 
> display settings (D1 - D4) did not change anything. Does anyone know 
> if this is an easy fix, such as just replacing a bulb or something more
complicated?
> 
>   
> 
> Thanks
> 
>   
> 
> D. Jeffrey Garth
> 
> 621 Greenbriar Drive
> 
> Williamstown, NJ 08094-1149
> 
> 73, WB2ZBN
> 
> Club Publications
> 
> www.w2mmd.org
> 
>   
> 
> "Choose a job you love, and you will never have to work a day in your
life"
> - Confucius
> 
>   
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/ To support QSL/QTH.net: 
> http://www.qsl.net/donate.html
> 
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html