[ICOM] IC-706 to hf amplfier

[Jim Miller]

I use mine without interfaces BUT if you are not comfortable with it remember the cost of the interface is a LOT CHEAPER than repair.  73, Jim KG0KP

-----Original Message-----
From: icom-bounces at mailman.qth.net [mailto:icom-bounces at mailman.qth.net] On Behalf Of wa2lbi at gmail.com
Sent: Wednesday, November 13, 2019 4:45 AM
To: Kelly Taylor; ICOM Reflector
Subject: Re: [ICOM] IC-706 to hf amplfier

I used a reed relay on HSEND of my IC-706MkII to key an Ameritron AL-811H.Ken WA2LBI LG G6 ------ Original message------From: Kelly TaylorDate: Tue, Nov 12, 2019 22:25To: ICOM Reflector;Cc: Subject:Re: [ICOM] IC-706 to hf amplfierHi Fern,

Isolation is always good practice. 

73, kelly, ve4xt 

Sent from my iPhone

> On Nov 12, 2019, at 21:03, Fern Rivard  wrote:
> 
> Sorry John but is not answering my question.
> I want to make sure that I don't fry anything in the iC-706MII G when interfacing to my alpha 9500 hf amp.
> Fern
> 
> 
> -----Original Message----- From: w5jmw at towerfarm.net
> Sent: Tuesday, November 12, 2019 6:06 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] IC-706 to hf amplfier
> 
> oon the 13 pin plug Hsend is hf..160-6,Vsend is vhf 144-450...73 john
> 
> 
> 
> 
> 
> 
> 
> 
>> On 2019-11-12 18:50, Fern Rivard wrote:
>> I finally dug my IC-706 M II G out of the box and would like to hook
>> it up to my Alpha 9500 auto tune hf amplifier.
>> I have the OPC-599 cable and
 a correct 7 pin male connector for ACC2
>> interfacing.
>> However checking in the manual page 6, it is not clear as to which pin
>> I should use, pin 3 which is Hsend or pin 6 which is V send! Also, is
>> it safe to hook it up directly without an interface relay?
>> Any help would be greatly appreciated.
>> 73 from Fern  VE7GZ
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html

----
Your Moderator: Dick
 Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html