[ICOM] IC-706 to hf amplfier

[w5jmw at towerfarm.net]

On 2019-11-12 21:03, Fern Rivard wrote:
> Sorry John but is not answering my question.
> I want to make sure that I don't fry anything in the iC-706MII G when
> interfacing to my alpha 9500 hf amp.
> Fern
> 
> 
> -----Original Message----- From: w5jmw at towerfarm.net
> Sent: Tuesday, November 12, 2019 6:06 PM
> To: ICOM Reflector
> Subject: Re: [ICOM] IC-706 to hf amplfier
> 
> oon the 13 pin plug Hsend is hf..160-6,Vsend is vhf 144-450...73 john
> 
> 
> Well,It shouldn't.The alpha has a very low keying voltage.Having said 
> that.The 705 only has `1 keying option unlike many newer icom's,Fern,I 
> would check that in the book.Go to icom America/support/there is a 
> section on manuals..Look in theLegecy section.You can download the 
> book.OR go to mods.dk and you can get both operating and service...73

I had the 706 kk2g'sNow using a 7000 mobile.It drives a ameritron 500 
watt amp directly.But you can select relay or mosfet.I just do npr 
remember on the 706...I,d say yes with the 9500,but check...BTW If you 
need these manuals and can not find them let me know as I probably have 
them in pdf..73 john
> 
> 
> 
> 
> 
> On 2019-11-12 18:50, Fern Rivard wrote:
>> I finally dug my IC-706 M II G out of the box and would like to hook
>> it up to my Alpha 9500 auto tune hf amplifier.
>> I have the OPC-599 cable and a correct 7 pin male connector for ACC2
>> interfacing.
>> However checking in the manual page 6, it is not clear as to which pin
>> I should use, pin 3 which is Hsend or pin 6 which is V send! Also, is
>> it safe to hook it up directly without an interface relay?
>> Any help would be greatly appreciated.
>> 73 from Fern  VE7GZ
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html