[ICOM] IC910

[Roger Cooke]

Hi.

I have tried all the usual  things. The power supply is fine, a bNOs 
40Asupply. The inline fuses are ok and it is not in transmit, although 
that would not show this particular problem.

   I disposed of all my test gear years ago, so a waste of time me 
taking the top off!

There is an engineer locally who fixes rigs, so I shall take it to him.

Many thanks for the suggestions though.

73 de Roger, G3LDI

On 25/05/2019 14:12, GGLL via Icom wrote:
> What about your power supply?. Is it ok?.
>
> Power your rig from a 12V car battery if in doubt.
>
> Regards
> Guillermo
> LU5WE.
>
> El 25/5/19 a las 07:19, Roger Cooke escribi??:
>> Hi.
>>
>> ?? Only just joined this group, but glad to be a member. I ony have one
>> Icom and that's the ic910.
>>
>> It has been pretty good, only one real fault since owning it. However,
>> it has now developed another.?? It does not power up, but merely has a
>> rapid ticking noise, little more than one tick per second. Nothing is
>> indicate on the dial however. Anybody had this before??? Would appreciate
>> feedback if so.
>>
>> 73 de Roger, G3LDI
>>
>>
>>
>> ---
>> This email has been checked for viruses by Avast antivirus software.
>> https://www.avast.com/antivirus
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>