[ICOM] FS: Icom 7410 HF/6m transceiver

[Dean Norris]

Sold if.is.as u.describe

Merry Christmas & Happy New Year. MAGA!

________________________________
From: icom-bounces at mailman.qth.net <icom-bounces at mailman.qth.net> on behalf of John Geiger <af5cc2 at gmail.com>
Sent: Saturday, May 11, 2019 8:22:33 PM
To: forsale-swap at mailman.qth.net; ham4sale at yahoogroups.com; ICOM Reflector
Subject: [ICOM] FS: Icom 7410 HF/6m transceiver

I have for sale an Icom 7410 HF/6m transceiver with power cord, manual,
and hand mic.  This also has the optional 6khz and 3khz roofing filters
installed, which is a $190 value right there.

The rig receives and transmit just as it should.  However, It did suffer
some damage in shipping in the past.  The RF power/Mic gain knob is bent
but both functions can still be set.  The inner knob and stem for the PBT
control is missing, the outer PBT function works fine.  I am sure Icom
probably still has the parts available.  One back corner of the top case
has a slight bend in it, and there are a few scratches on the case, but it
looks pretty good overall.

This radio has a built in tuner, CW memory keyer, and IF DSP also. Radio
control and the digital modes can be done with a single USB cable.

I am asking $500 shipped for it and can take paypal/check/mo.  Due to the
aforementioned damage to the knobs, this is being sold as is with no
returns, but I guarantee that it does send and receive ok, and the other
functions work well also.

73 John AF5CC
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html