[ICOM] re adapter for IC-7610

[Fern Rivard]

Thanks for your reply. I found the required adapter on epay.
Fern


-----Original Message----- 
From: D Jones
Sent: Sunday, February 17, 2019 3:23 PM
To: icom at mailman.qth.net
Subject: Re: [ICOM] re adapter for IC-7610


DVI-D Dual link.
On Sunday, February 17, 2019 Fern Rivard <icom at mailman.qth.net> wrote:
I wanted to connect an external monitor to my IC-7610 but couldn’t do it as 
it requires an adapter to interface my 15 pin male cable from my monitor to 
the one on the IC-7610.
I would appreciate knowing what that adapter is called.
73 from Fern  VE7GZ
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html