[ICOM] re adapter for IC-7610

[Fern Rivard]

Thanks Pete, I found the adapter on epay.
Fern


-----Original Message----- 
From: manualman at juno.com
Sent: Sunday, February 17, 2019 3:41 PM
To: icom at mailman.qth.net
Subject: Re: [ICOM] re adapter for IC-7610

On the IC-7610, it's a DVI connector.
You might want to watch this You Tube presentation on an external monitor
connection.
https://www.youtube.com/watch?v=jexd4CXZTyA
Other then a much large screen, you still have to resort to the smaller
screen to do most of the screen functions.

Pete, wa2cwa


On Sun, 17 Feb 2019 14:58:02 -0700 "Fern Rivard" <crc at cyberlink.ca>
writes:
> I wanted to connect an external monitor to my IC-7610 but couldn�t
> do it as it requires an adapter to interface my 15 pin male cable
> from my monitor to the one on the IC-7610.
> I would appreciate knowing what that adapter is called.
> 73 from Fern  VE7GZ







----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html