[ICOM] using IC-7610 and IC-7300 on cw

[Mark Johns]

I believe you can transmit on one VFO and receive on the other. Each VFO carries it's own mode, but you'll have to tune them separately.
-- 
Mark D. Johns, KØJM (ex-KØMDJ) Minneapolis, MN EN35hd-----------------------------------------------"Heaven goes by favor; if it went by merit,    you would stay out and your dog would go in."      ---Mark Twain 

    On Thursday, August 8, 2019, 11:31:49 AM CDT, Fern Rivard <crc at cyberlink.ca> wrote:  
 
 What is the best way to configure the IC-7610 and IC-7300 to transmit cw while receiving lsb on say 75 meters?
Also the same situation if wanting to send cw and receive usb on say 20 meters?
I know that the old heathkit twins and the ten tec transceivers have no issues with this.
Fern
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html