[ICOM] IC 756

[Ray Keefe]

Pete,

Maybe I can pay you back a little here for the old Courier 1m paper work 
you sent me a couple of years ago.

At one time in the past I was trying to buy a 756 with the lines in the 
display. I found a fellow in the Netherlands who had a kit with a new 
lcd, but his websites have been taken down since then. By the time I 
located a good used display, but the radio was sold within a matter of a 
few days while I chased the display down.

Fast forward to today. If you want to replace the display, I found this 
http://wb4iuy.blogspot.com/2017/12/display-transplant-into-icom-ic-756-non.html

and I also located a source that appears to be reasonable for the 
display, they list it in Dollars, they're located in Poland. They do 
indicate they have 2 of the display's mentioned in the article. 
https://www.unisystem-displays.com/en/products/mono-lcm/graphic/wg320240d-tmi-tz.html

Good luck with it.

Ray

K2RJK

Check out my shop for handmade unique gifts for Weddings and ham radio 
operators WWW.THEWOODENHAM.COM


On 10/18/2018 9:44 PM, manualman at juno.com wrote:
> I inherited a IC-756 with the lines in the display. I recall replacement
> displays are no longer available from any vendor. The rig works great on
> receive and transmit. I was able to mimic some of the display readings
> using the DX Commander software but was wondering if there was any other
> fixes (hardware or software) to make the rig a little more useful.
>
> Pete, wa2cwa
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>