[ICOM] re using voice recorder in IC-7610

[Fern Rivard]

Thanks for your reply. That's unfortunate as when I read the detailed manual 
it sure sounded that they had enabled that feature to playback the recorded 
off air audio to be able to transmit it.
I know that the IC7300  would not do that directly as one had to record it 
in a computer before being able to play it back on the air which really made 
it useless for that option.
I recall talking to some reps from Icom America last year at the Dayton 
hamfest and they told me that they couldn't enable that feature as it was 
ILLEGAL!
Well guess what Elecraft has that feature on all their hf transceivers as 
well as other manufacturers.
What they also really need to enable in those new Icom radios is a noise 
gate in the mic input to eliminate any background to be transmitted (such as 
noisy blower in amplifier, etc.)
That feature should be easily enabled with new firmware. The older Yaesu 
FT-980 even that mic noise gate in it.
73 from Fern  VE7GZ


-----Original Message----- 
From: kf2m at greggeek.com
Sent: Thursday, July 12, 2018 4:08 PM
To: ICOM Reflector
Subject: Re: [ICOM] re using voice recorder in IC-7610

The radio does not allow playback of recorded transmissions over the air. 
Nothing wrong with the radio.








Get Outlook for Android







On Thu, Jul 12, 2018 at 5:59 PM -0400, "Fern Rivard" <crc at cyberlink.ca> 
wrote:










I just recently acquired a new IC-7610.
I've been able to record incoming transmissions off air  but I can't seem to
enable the radio to transmit that recording.
When I try to play it back, I do hear the to be transmitted audio but no ptt
is being enabled,
How do I enable that feature>
73 from Fern

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html





----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html