[ICOM] HF Xcvr, Filters, controller, mic, and more FS

[Ken, W8EK]

Icom HF Transceiver, Crystal Filters, Screwdriver HF
Mobile antenna controller, mobile bracket, hand mic,
cables, and other Icom items For Sale:
.

.
Icom IC-701 HF Transceiver:

If you want a simple to operate HF transceiver, then
this is the rig for you. It covers 160 thru 10 meters,
and puts out 100 Watts. It has two VFOs that are simple
to switch between or operate split, all from one switch.
No hard to understand menus on this one. Just attach
an antenna, power it up and go.

The top panel has a door for various adjustments.
The rear panel has various I/O connections.

It needs 13 V DC at about 19 amps.

This particular unit also has a narrow CW filter in it.
It is also in its original box. It has always been in
A/C, but never around smoke. Cosmetics are extremely nice.

Hand mic, DC power cord, internal narrow CW filter, and
paper work in its original box for only $275 plus shipping
from Florida.
.

.
Icom Crystal Filters:

These are all original Icom crystal filters used in
the 9 MHz IF of many Icom rigs including IC-706,
IC-725, IC-726, IC-728, IC-729, IC-736, IC-737,
IC-738, IC-746, IC-756, IC-757, IC-780, IC-781 and
probably others. They should fit any Icom rig that
uses a 9 MHz filter, but please check your manual.

Filter number, bandwidth, and price

FL-32 A, 500 Hz CW or narrow digital, $100
FL-80, 2400 Hz standard SSB, $75
FL-101, 250 Hz narrow CW, $95
FL-103, 2800 HZ Wide SSB, $100
.

.
Screwdriver HF mobile antenna controller:

N2VZ TuneMatic Automatic Motorized Antenna Controller

This self-contained antenna controller will automatically
adjust the screwdriver antenna. It operates 1-60 MHz, and
keeps track of the parameters of the antenna. This one is
designed to be used with the Icom IC-7000, but can be
used with other rigs.

This one appears to be new, unused. With paper work for $210.
.

.
Icom MB-51 Mounting Bracket

This is an odd mounting bracket that is not often found
in ham circles. It can attach to a dash and swivel to
most any direction. It has a screw to take "head mounts"
such as the MB-63 for the IC-706. Basically it is an
additional way to mount a remote head. It is chrome
plated, and really looks great. $40
.

.
Icom HM-36 Hand Microphone

This is the standard hand microphone that comes with
many modern Icom rigs when new. It has a round 8 pin
connector, and also has up and down switches on top.
This one works fine and looks like new. $30
.

.
DC Power Cable

This is the heavy duty power cable as used on most of
the Icom HF rigs, plus also many Kenwood, Alinco, and others.
It has the 6 pin molex connector, with four pins used - two
for plus and two for ground.
It looks good, and of course works fine. $22
.

.
Cable for Icom Transceiver to Digital Controller:

The package says "The Country Ham RTC2-Ic", TNC-Radio
Cable w/ DIN and Mike Plug. For use with MFJ, AEA, and
PacComm TNCs using a 5 pin DIN plug. The opposite
end has a round Icom 8 pin connector as used on most
Icom rigs. Pin outs are listed on the label.

There is also an attached cable with 1/8 inch plug to
go to the speaker jack.

This cable is apparently new, still in its original bag.

Only $12
.

.
I also have many other accessories of many different
brands available.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.



.