[ICOM] Antenna controller, Mic Headset, mobile brackets, mic, and much more FS

[Ken, W8EK]

Screwdriver HF Mobile antenna controller, Mic Headset Combo,
mobile brackets, hand mic, cables, and other Icom items For Sale:
.

.
Screwdriver HF mobile antenna controller:

N2VZ TuneMatic Automatic Motorized Antenna Controller

This self-contained antenna controller will automatically
adjust the screwdriver antenna. It operates 1-60 MHz, and
keeps track of the parameters of the antenna. This one is
designed to be used with the Icom IC-7000, but can be
used with other rigs.

This one appears to be new, unused.  The new Tarheel antenna
has already been sold. With paper work for $210.
.

.
Heil Traveler 706 Headset/Mic

Everyone knows that Heil audio equipment is top of the
line. Use this unit to get exceptional audio quality.
It consists of a boom mic and single earphone, and
terminates in a round 8 pin connector. A 3 foot adapter
cable converts it to a modular connector for the Icom
7000/706. It is specifically made for Icom equipment.

It has a pod with PTT switch and up/down
switches. With paper work for $75.
.

.
Icom Mounting Brackets:

Icom MB-62 Mobile Bracket:

The MB-62 is the mobile mounting bracket that is
used for all of the Icom IC-706 series, IC-7000,
and others. Basically for any rig that is about
6 1/2 inches wide. It is also used with the AT-180
antenna tuner.

This one is NEW, still in its plastic inside the
original box, with all hardware. $28
.

Icom MB-51
This is an odd mounting bracket that is not often found
in ham circles. It can attach to a dash and swivel to
most any direction. It has a screw to take "head mounts"
such as the MB-63 for the IC-706. Basically it is an
additional way to mount a remote head. It is chrome
plated, and really looks great. $40
.

.
Icom HM-36 Hand Microphone

This is the standard hand microphone that comes with
many modern Icom rigs when new. It has a round 8 pin
connector, and also has up and down switches on top.
This one works fine and looks like new. $30
.

.
DC Power Cable

This is the heavy duty power cable as used on most of
the Icom HF rigs, plus also many Kenwood, Alinco, and others.
It has the 6 pin molex connector, with four pins used - two
for plus and two for ground.
It looks good, and of course works fine. $22
.

.
Modular to 8 pin cable

This cable has a modular flat 8 pin plug on one end and
the standard round 8 pin connector on the other end.

It is a "one to one" cable, in that pin 1 on the modular
connector goes to pin 1 on the round 8 pin connector, pin
2 to pin 2, etc.

This type cable is often used for digital interfaces (such
as West Mountain RigBlastrers, or Tigertronics SignaLinks),
however can be used for other purposes.

This one works and looks fine.  Only $12.
.

.
Cable for Icom Transceiver to Digital Controller:

The package says "The Country Ham RTC2-Ic", TNC-Radio
Cable w/ DIN and Mike Plug. For use with MFJ, AEA, and
PacComm TNCs using a 5 pin DIN plug. The opposite
end has a round Icom 8 pin connector as used on most
Icom rigs. Pin outs are listed on the label.

There is also an attached cable with 1/8 inch plug to
go to the speaker jack.

This cable is apparently new, still in its original bag.

Only $12
.

.
Cable for computer control of your transceiver:

This cable was used to create computer control
of an Icom IC-706 Mk II G. It probably will work
with other Icom rigs as well as the IC-706, and
probably any ham rig that needs an 1/8 inch plug
for computer control.

It has a USB connector on one end, and a 3.5 mm
plug to plug into the rig on the other end.

Only $20.
.

.
I also have many other accessories of many different
brands available.
Just too many to list here. Please e-mail your requests.

.
Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK at FLHam.net or W8EK at arrl.net
Voice Phone (352) 732-8400



.




.