[ICOM] Icom 756PRO series and INRAD roofing filter

[John Geiger]

Hi Phil,

Thanks for the response. It sounds like the INRAD roofing filter really
helps and would be a worthwhile addition to the756 PRO series.

73 John AF5CC

On Sat, Jun 17, 2017 at 11:02 AM, WA2CLX <wa2clx at frontier.com> wrote:

> John,
>
> I have an Icom 756Pro3 with the INRAD filter installed on the A VFO side.
> It does help quite a bit with strong near to adjacent signal rejection. I
> was struck when tuning a few KHz past a particularly strong signal and it
> was literally gone, though I could obviously see it on the spectrum
> display. I haven't thought to do an A/B side comparison...but I do
> appreciate the benefit, especially on contest weekends.
>
> Phil, WA2CLX
>
> On 6/15/2017 1:22 PM, John Geiger wrote:
>
>> Has anyone on the list with an Icom 756PRO series radio (any version)
>> tried
>> the INRAD roofing filter in it?  Does it make a big difference, and did
>> you
>> consider it worth the purchase price?
>>
>> 73 John AF5CC
>> ----
>> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
>> Icom Users Net: Sundays, 1700Z, 14.316 MHz
>> Icom FAQ: http://www.qsl.net/icom/
>> To support QSL/QTH.net: http://www.qsl.net/donate.html
>>
>>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>