[ICOM] IC7300 Smeter

[Julio Peralta]

I'm not sure about the answer to your last question, perhaps someone else on
the list may be able to answer your question.

Julio

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Guenter
Klomann
Sent: Wednesday, January 11, 2017 8:45 AM
To: ICOM Reflector
Subject: Re: [ICOM] IC7300 Smeter

ok, the Specification page show the sensitivity for preamp1 of -123dBm for
10dB S/N and SSB bandwidth
S0 should be -127dBm. The Specification do not say, that the S0 reading is
-127dBm and S9 is 50 uV.
So, is the S9 Smeter reading correct (50uV) with preamp1?

Guenter, DK1RI

> Julio Peralta <jperalta4 at verizon.net> hat am 11. Januar 2017 um 14:05
geschrieben:
> 
> 
> Check your manual on the Specifications page under Sensitivity. In my 
> manual not for the 7300, it shows sensitivity measurements done with
Preamp 1 on.
> Yours may be different so check the manual.
> 
> Julio, W4HY
> 
> -----Original Message-----
> From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Guenter 
> Klomann
> Sent: Wednesday, January 11, 2017 5:45 AM
> To: icom at mailman.qth.net
> Subject: [ICOM] IC7300 Smeter
> 
> The IC7300 S-meter readings vary with the settings of the 
> Preamp1/Preamp2/no_preamp.
> 
> Wich setting show the the correct value measured at the antenna input? 
> (I did not found anything in the manual)
> 
> The Flex show exact values independent of the the settings, the KX3 
> require
> Preamp1 (as given in the manual)
> 
> Tnx for answer
> Guenter
> DK1RI
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users
> Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To 
> support QSL/QTH.net: http://www.qsl.net/donate.html
> 
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/ To support QSL/QTH.net: 
> http://www.qsl.net/donate.html
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html