[ICOM] IC7300 Smeter

[Julio Peralta]

Check your manual on the Specifications page under Sensitivity. In my manual
not for the 7300, it shows sensitivity measurements done with Preamp 1 on.
Yours may be different so check the manual.

Julio, W4HY 

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Guenter
Klomann
Sent: Wednesday, January 11, 2017 5:45 AM
To: icom at mailman.qth.net
Subject: [ICOM] IC7300 Smeter

The IC7300 S-meter readings vary with the settings of the
Preamp1/Preamp2/no_preamp.

Wich setting show the the correct value measured at the antenna input? (I
did not found anything in the manual)

The Flex show exact values independent of the the settings, the KX3 require
Preamp1 (as given in the manual)

Tnx for answer
Guenter
DK1RI
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html