[ICOM] ICOM 756PRO2

[Edward L Dowdy]

What mode are you in? If you're in SSB. Are you speaking into the mic? 
Without audio input during SSB, there is no output.

73,
Ed KA9EES


-----Original Message----- 
From: Steve via Icom
Sent: Monday, February 27, 2017 1:57 PM
To: icom at mailman.qth.net
Cc: Steve
Subject: [ICOM] ICOM 756PRO2

   About 4 months ago, I bought an ICOM 756Pro2 that looked in great 
condition.  Since purchasing this radio I have mainly used it for  dialing 
up the freqs & just listening on all the bands - no transmitting.   Recently 
I decided to check out the transmitter - hooked up the MFJ 969 Tuner to 
check out the tranny & antenna ..  dialed up the HF freqs - hit the Mic to 
transmit -- The 756Pro2 screen shows a real nice spike during transmission - 
the red TX light turns on --- indicating that I'm transmitting ..... BUT --  
there is no needle activity on the Tuner .. Unable to check the output power 
as there is NO "Po" light on the 756Pro2 (however, when I click the same 
button to SWR, the green light comes on) ..
Next step is to check the Tuner --  hooked the Tuner up to my VHF/UHF 
Tribander to check functionality ... it has needle movement on the Reflected 
Power but not on the Forward (most likely of low watts on Tribander) ...
So, I'm appealing to all the ICOM 756Pro2  Techies out there for H E L P 
73
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html