[ICOM] There Is A Dual Bander That Can Do VHF/VHF and UHF/UHF 08/1917

[Paul Manuel]

" Qsl on all comments about Icom Dual Bander, have several Icoms and love
> em all. Note however that there is a dual bander that will do same band
> at the same time in both vfo's, and it is the Kenwood TM-D710AG "
Bill, I was replying to this email, about "same band at same time in both vfos."
73 Paul K4PDM

Sent from Yahoo Mail for iPhone


On Saturday, August 19, 2017, 12:07 PM, WD8ARZ <wd8arz at comcast.net> wrote:

Can you use your icom ht to access your icom dual bander in digital mode 
and switch modes, frequencies and turn off an attached *HF*radio to the 
mobile dual bander rig from the ht dual bander? If so, which rigs and 
software do that? Thank you for sharing .... Bill / WD8ARZ .... out for now

On 8/19/2017 11:12 AM, Paul Manuel via Icom wrote:
> Almost every true dual band radio that has been made in the last several years are capable of receiving the same band on both sides simultaneously--Kenwood, Yaesu, and Icom.
> The current IC-2730 does it perfectly, as does my Yaesu FT-8900, which came out about 15 years ago.
> 73 Paul K4PDM
>
> Sent from Yahoo Mail for iPhone
>
> On Saturday, August 19, 2017, 9:40 AM, WD8ARZ <wd8arz at comcast.net> wrote:
>
> Qsl on all comments about Icom Dual Bander, have several Icoms and love
> em all. Note however that there is a dual bander that will do same band
> at the same time in both vfo's, and it is the Kenwood TM-D710AG  - From
> http://www.kenwood.com/usa/com/amateur/tm-d710ga/  about two thirds the
> way down that page it says:
> snip snip
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html