[ICOM] Older Icoms question

[John Geiger]

Hi Ken,

Thanks for the fast answer.  Guess there is no AF out there.  Do you still
like the 720A?

73 John AF5CC

On Tue, Sep 20, 2016 at 12:46 PM, Ken Winterling <wa2lbi at gmail.com> wrote:

> John,
>
> According to my IC-720A service manual, there isn't any connection to pin 8
> of the mic connector.
>
> Ken
> WA2LBI
>
>
> On Tue, Sep 20, 2016 at 1:33 PM, John Geiger <af5cc2 at gmail.com> wrote:
>
> > On the 1990 and later Icom models the AF output is also found on the mic
> > connector, on 8 pin, which is nice for building a simple digital modes
> > interface.  Is this also true on the older Icoms like the 720/730/740?
> The
> > manual never mentions it, but the wiring for the other pins is the
> same.  I
> > have an Icom 720A on the way and want to start working on an interface
> for
> > it.
> >
> > 73 John AF5CC
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
> >
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>