[ICOM] IC-746Pro Audio/Receiver Cut Out Issue

[Bert Almemo]

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Mark K3MSB
Sent: Tuesday, November 15, 2016 10:15 PM
To: ICOM Reflector
Subject: [ICOM] IC-746Pro Audio/Receiver Cut Out Issue

Hello All

Our club's 746Pro is having an issue.   The following was written by one of
our members:

"I had problems with the Icom-746PRO again this past weekend during the WAE
RTTY contest.   The radio and station worked flawlessly for a couple of
hours and then the audio suddenly started dropping out (as described at the
last meeting).

I checked all radio settings and disabled anything (i.e. NB, squelch, etc)
that could potentially cause the receive to cut/drop out.   Nothing made a
difference.

I made a couple of video recordings which I posted on the club's  website
<http://www.qsl.net/w3zgd/>.  Click on the "Links" tab (bottom of the left
panel) and scroll to the bottom of the page.  There are two recordings, 9Mb
and 14Mb, which will likely take a couple minutes to download to your
computer.   You probably only need to download one of the files to get a
idea of what is going on.

Both videos begin with no sound after the radio cut out while monitoring a
S9+ signal from Europe.   In each recording, I pressed the PTT
button on/off to switch the radio from RX to TX and back which seems to
consistently bring the receive back -- sometimes for a few seconds (as in
these recordings) and other times for a few minutes.   While the audio
level in the video is not great, you can see the strong signal strength on
the meter which lasts for a couple of seconds and then fades out.    The
fade out is not from the station stopping their transmission -- it's simply
the radio receive fading to zero on its own."

Comments welcome

73 Mark K3MSB
----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html