[ICOM] CI-V

[Rich Dailey]

Yeah, that's a lil small for my eyes too. Right click, then open in new
window or tab. Zoom in as needed.

N8UX

On Sat, May 14, 2016 at 2:27 PM, Mike Reublin NF4L <nf4l at comcast.net> wrote:

> How do you see the schematic?
>
> Mike NF4L
>
> > On May 14, 2016, at 2:15 PM, Rich Dailey <redailey1 at gmail.com> wrote:
> >
> > And another, even simpler homebrew option, similar to the product on
> Amazon
> > -
> >
> > http://www.qsl.net/g3vgr/civ.html
> >
> > On Sat, May 14, 2016 at 2:12 PM, Rich Dailey <redailey1 at gmail.com>
> wrote:
> >
> >> Call me old fashioned (or an old fashioned Icom user), but I ran this
> >> interface in the shack for 15 years with zero problems, absolutely no
> >> static discharge issues (and I had plenty of them with other things).
> This
> >> was before the days of USB, and I ran two Icom radios off of one
> interface
> >> and a/b switched between computers. Later computers requires installing
> >> serial port boards, of course. And it cost around fifty cents in
> >> (scrounged) parts.
> >> For DX cluster, contests, satellite operating... it performed
> flawlessly.
> >>
> >> http://www.plicht.de/ekki/civ/civ-sch1.html
> >>
> >> 73,
> >> Rich, N8UX
> >>
> >> On May 14, 2016 10:28:19 AM CDT, Mike Reublin NF4L <nf4l at comcast.net>
> >>> wrote:
> >>>> I need a new CI-V cable for my PRO II. All I can find are USB. I need
> >>>> to be able to also connect the SteppIR controller using a "Y" cable,
> >>>> and that's RS-232. . How are you guys doing it?
> >>>> 73, Mike NF4L
> >>>
> >>
> > ----
> > Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> > Icom Users Net: Sundays, 1700Z, 14.316 MHz
> > Icom FAQ: http://www.qsl.net/icom/
> > To support QSL/QTH.net: http://www.qsl.net/donate.html
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>