[ICOM] 746

[John Geiger]

Hi Lloyd,

I would first remove the bottom cover and make sure that the filter didn't
come lose.  I have had that happen with some Icom filters before. Pushing
it back in might cause it to make contact again.

73 John AF5CC

On Sat, Jan 30, 2016 at 4:10 PM, Lloyd Curry <lloyd.na4d at gmail.com> wrote:

> I have an original Icom 746 (non-pro) with the 500 hz cw filter. The
> filter has stopped working. When I push in the filter button the "nar"
> appears on the screen but there is no change in the audio or bandwith.
> Any ideas?
>
> --
> Lloyd C. Curry
> Amateur Radio NA4D
> Greensburg, KY
>
> I'm so nice I wish I had a friend just like me.
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>