[ICOM] Wave Files not keying IC746 VOX

[Floyd Petri]

Should have asked if it was allowed before doing it. No music is not allowed
unless you are in the International Space Station.
73,
Floyd, KF5YDH

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Tony Hwang
Sent: Wednesday, January 20, 2016 11:12 AM
To: ICOM Reflector
Subject: Re: [ICOM] Wave Files not keying IC746 VOX

I think the computer output should be at line level to trigger the VOX.
Tried to play music on the air?  Is it allowed?
73,
Tony, VE6CGX

Mike wrote:
> Trying to get my IC746 to transmit using the VOX when a Wave file is
played
> from the computer.  The 746 does work when the "TRANSMIT" button on the
> front panel is engaged and the function key is pressed.  Then the Wave
file
> will drive the radio to full output and sounds good when listening using
> the built in monitor on the 746.  Also, VOX works without pushing the
> "TRANSMIT" button using a microphone.
>
> The wave file comes from the computer into the 746 via ACC1, pin 4.
>
> N1MM+ is the contest S/W being used.
>
>    73,
>    Mike, K4GMH
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
>

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/
To support QSL/QTH.net: http://www.qsl.net/donate.html


---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus