[ICOM] Wave Files not keying IC746 VOX

[Dick Dickinson]

Music..?  I hear a lot of people whistling on the air these days.


Dick - KA5KKT

-----Original Message-----
From: Icom [mailto:icom-bounces at mailman.qth.net] On Behalf Of Tony Hwang
Sent: Wednesday, January 20, 2016 12:12 PM
To: ICOM Reflector
Subject: Re: [ICOM] Wave Files not keying IC746 VOX

I think the computer output should be at line level to trigger the VOX.
Tried to play music on the air?  Is it allowed?
73,
Tony, VE6CGX

Mike wrote:
> Trying to get my IC746 to transmit using the VOX when a Wave file is 
> played from the computer.  The 746 does work when the "TRANSMIT" 
> button on the front panel is engaged and the function key is pressed.  
> Then the Wave file will drive the radio to full output and sounds good 
> when listening using the built in monitor on the 746.  Also, VOX works 
> without pushing the "TRANSMIT" button using a microphone.
>
> The wave file comes from the computer into the 746 via ACC1, pin 4.
>
> N1MM+ is the contest S/W being used.
>
>    73,
>    Mike, K4GMH
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom 
> Users Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: 
> http://www.qsl.net/icom/ To support QSL/QTH.net: 
> http://www.qsl.net/donate.html
>

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net Icom Users
Net: Sundays, 1700Z, 14.316 MHz Icom FAQ: http://www.qsl.net/icom/ To
support QSL/QTH.net: http://www.qsl.net/donate.html