[ICOM] Internal tuners

[Dwayne]

H i Fern tnx for the reply..  Well I have heard that on the air and quiet 
sure I have read that on the internet some where and just wanted to be 
sure..  Dwayne
----- Original Message ----- 
From: "Fern Rivard" <crc at cyberlink.ca>
To: "ICOM Reflector" <icom at mailman.qth.net>
Sent: Saturday, January 09, 2016 12:47 PM
Subject: Re: [ICOM] Internal tuners


> Who said that Dwayne?  I don’t see any reason as to why you can’t use the 
> tuner on 10 mhz.
> Fern
>
>
> -----Original Message----- 
> From: Dwayne
> Sent: Saturday, January 09, 2016 12:20 PM
> To: ICOM Reflector
> Subject: [ICOM] Internal tuners
>
> Hi Name is Dwayne  (ve6qx).. I'am trying to understand why its not a good 
> idea to have the internal tuner in my Ic-775 Dsp on when driving a pair of 
> 3-500's  grounded grid..  The reson I want to do this is because on 10 
> Mhz.  the input circuit to the amp has a s w r of about 1.9,, because the 
> amp was built before 10 mhz. became popular to use..  They used the same 
> inpuit circuit for 10 mhz. as 14 mhz.    Anyone who can offer a good 
> answer please..
>  Dwayne
>
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html
> ----
> Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
> Icom Users Net: Sundays, 1700Z, 14.316 MHz
> Icom FAQ: http://www.qsl.net/icom/
> To support QSL/QTH.net: http://www.qsl.net/donate.html