[ICOM] No audio/ RF out on 60m ic-756Pro3

D C _Mac_ Macdonald k2gkk at hotmail.com
Thu Dec 8 08:40:31 EST 2016


See: http://www.w0qe.com/60m_operation.html

While this does not specifically cover the Pro 3, the other 756 rigs are NOT okay for 60m.


* * * * * * * * * * *
* 73 - Mac, K2GKK/5 *
* (Since 30 Nov 53) *
* Oklahoma City, OK *
* USAF, Ret'd 61-81 *
** FAA, Ret'd 94-10 *
* * * * * * * * * * *





From: Icom <icom-bounces at mailman.qth.net> on behalf of WA2CLX <wa2clx at frontier.com>
Sent: Thursday, December 8, 2016 06:52
To: icom at mailman.qth.net
Subject: [ICOM] No audio/ RF out on 60m ic-756Pro3

Good day group,

I've been trying to run JT65 and or USB on 60m with no luck. I have a
late serial number IC-756Pro3 which is supposed to allow operation on
the 60m channel allocations.

I think I've set the frequency right per the manual (dial frequency on
an approved channel). My radio goes into transmit mode but no audio and
therefore RF out with either the mike in USB mode, or computer audio in
for JT65.

Receive bandwidth at 3KHz, and transmit bandwidth set from 100 to 2900
Hz (wide).

All works fine on all the other bands.

Wondering what I'm missing in terms of setups?

Thanks for your ideas and suggestions.

Phil, WA2CLX

----
Your Moderator: Dick Flanagan K7VC: icom-owner at mailman.qth.net
Icom Users Net: Sundays, 1700Z, 14.316 MHz
Icom FAQ: http://www.qsl.net/icom/

The Icom Information and FAQ Page<http://www.qsl.net/icom/>
www.qsl.net
The Information and FAQ Page. This new page will serve as a technical resource, link repository and FAQ input point for Icom radio owners and users.



To support QSL/QTH.net: http://www.qsl.net/donate.html


More information about the Icom mailing list